In Spain 50.000 biomass combustion equipment is being installed annually, many of them replacing fossil, diesel and gas energy systems, which negatively affect climate change. Is being implanted massively in independent homes, and increasingly in Neighborhood communities, industries, warehouses, farms, greenhouses, hotels, residences, universities, schools, hospitals and swimming pools.

In EXPOBIOMASA, The leading firms show to the installers the latest solutions and technical advances that improve both energy savings and efficiency and the quality of life and comfort of its customers.

Part of the success in the installation of biomass is due to quality control, design and technology in the components of the combustion equipment itself and in the auxiliary components of the installation. The support of brands to professionals in the sector with training, advice, ergonomics and efficiency in their work is essential for the 8.000 installation professionals linked to biomass in Spain. In fact, proper planning and execution of the biomass installation is clave so that customers can generate savings, comfort and environmental sustainability in their heating system.

Prado Silos has installed two silos of 8.700m³ for the storage of biomass as part of the new biomass power plant of 40 MW of the Ence Group in Huelva. A project developed through the engineering company Sener. The roofs of these silos have been designed with an angle of 40 degrees to achieve an optimal storage of the biomass. The silos also have an access door for vehicles with dimensions of 3,5 by 3,5 m. The silos are unloaded with a vibrating floor mounted in a hopper at 25 degrees of inclination.
Jose Galiño, Responsible for R & D of Dinak, presents the novelties of Dinak in Expobiomasa, especially, those focused on the Dinakisol system, a system that installed in the passage of the chimney through the slab or wall, prevents the risk of fire and allows to increase the energetic efficiency, avoiding losses of heat by that point and solving the problems in the steps of forged or combustible walls.
The flue of a chimney is the depression that originates in the base of the chimney, as a consequence of the difference of pressures created by the gases contained in it, that is to say, the fumes and the column of external air. The specific weight of the fumes, since they are always hotter than the ambient air is always lower, so: as the external pressure is higher than the internal pressure at the base of the chimney, the fumes experience a push that tends to evacuate them towards above; This push is the natural shot, created by the chimney.
"SCHOTT ROBAX® IN FRONT - THE NEWS" - with this headline invites SCHOTT ROBAX® to take a look at the future at the Expobiomasa trade fair held in Valladolid from 24 to 26 in September of 2019 (pavilion 4 / stand 465).
The Government Board of the City of Sant Antoni approved the May 10 the contracting of the installation of a biomass boiler to supply the needs of the sports complex Can Coix. The tender for this project has been called for 292.526 euros. This action will involve the installation of a thermal generator (boiler) of forest biomass chips to replace the current gas generator in the municipal pool.
Pellet stoves in Europe: more and more. The European trend regarding the installation of new pellet stoves is very positive. Based on the data from the Statistical Report prepared by Bioenergy Europe, we can estimate that sales increased by 16% between 2016 and 2017. At the end of 2017 there were in Europe over 4,6 millions of pellet stoves operating thanks to annual sales that exceeded the 570.000 units.
The Spanish Association of Biomass Energy Valorization (Avebiom) joins the tendency of most EU countries to guarantee the quality of biomass installation companies and has launched the first seal of (IBC). It is a brand that supports the quality and specialization of companies in the installation, operation, maintenance and repair of thermal biomass installations.
The Swedish company, Trelleborg Wheel Systems has announced that it will completely redesign the manufacturing process of its solid tires. The company will do so through the introduction of an advanced biomass boiler.
How a biomass installer is trained Although the increase of installers trained in biomass is remarkable compared to years ago, Araceli Pimentel, of BRONPI, believes that "an important part does not yet have sufficient knowledge". There is no regulated official training for installers of biomass stoves and boilers, so in practice, this is acquired with the experience of day-to-day work.
The main objective of the work started at 2016 is to identify, design, model and develop a prototype of optimal filtration and particle retention, based on electrostatic technology (ESP), electrostatic precipitators for application in domestic boilers. At the beginning of March there was a meeting of the SIREP research project, led by Dinak, a company exhibiting expobiomasa 2019, in which the Energy Technologies Group of the University of Vigo also participates.
When it comes to heating your home if you are looking for savings and sustainability, a pellet or biomass stove is one of the most efficient heating systems. And as indicated from www.aquatubo.com at the time of acquiring one of these systems must take into account 3 essential features: Location The place where you will place your stove is very important as the heat produced by a pellet stove will reach those areas that are in contact with the stove.
The metamorphosis of POST Luxembourg's Hotel des Poste combines sustainable technology to minimize energy consumption through natural ventilation, solar, wind and biomass. The design of this carbon-free architecture is based on the circular economy and the concept "from cradle to cradle", a holistic method that is concerned with ensuring that everything that involves a product - from the conception of the idea to the decline - be sustainable and its life cycle does not end.