Valorize the biomass

The demand for biomass for energy use is considerably increasing in recent years, both for pellet manufacturing and to directly supply industrial facilities, Distritc Heatings and the new power generation plants.

Given this increase in demand each time it is being supplied both splinters and other biofuels of agroforestry origin such as stumps, bundles of branches, pruning of fruit trees, pomace, husks, branches, bushes ... and recycling material.

All this biomass requires increase its homogeneity to the optimum point (dry, grind, select ...) before entering facilities suitable for this type of biomass in order to achieve an efficient energy recovery that complies with the regulations.

The Jenz BA725D shredder is a mobile equipment for shredding wood logs, woody by-products, pruning remains, bark… It incorporates rotor speed control; 6m inlet hopper with feeding belt with plates and lower toothed roller and a feeding opening of 1500x820mm. The drum has a speed of 526 rpm and is made up of up to 38 cutting pieces. The discharge by conveyor belt can reach a height of 3,2 m. The engine must have a power of 530 hp and can produce a chip of up to 60x60mm with a production of 110 to 220 m3 / h.
The Europe Chippers C1060T supports logs up to 60 cm in diameter with productions of 150 m3 / h thanks to its robust rotors and motor up to 400 CV. It includes four robust crushing rollers, two lateral and two at the top and bottom. Optionally you can mount a feeding table by chains to introduce the logs in a simple and progressive way. Its chassis with track system gives you total freedom to move even on extreme slopes and under any weather conditions, such as rain or snow.
It is a drum chipper mounted on a two-axle chassis and towed by a tractor or truck from 400 to 600 CV, with good results for large volumes of biomass. Its crusher rotor measures 890x1320mm and carries 32 interchangeable blades or hammers. It incorporates a hopper with 3,7m feeding tape. The unloading is done by conveyor belt. With the Multi-Lift system it can be supplied in static version, with Siemens electric motor of 250 kW or higher and 460 / 690V.
It is capable of crushing practically any type of material. It has 4 special shredding programs: wood, green, waste and bulky, which improve its production and avoid jams and engine overheating. The maximum productions for wood are 50 t / h.
The new model of 3310 blade chipper is designed to move thanks to its dimensions allow its transport inside a container. Despite its compact size it has good access to the interior for maintenance. With a power of 540 CV is adapted to the European emission regulations. It has a rotor with 4 / 8 cavities for blades for the production of chips. It incorporates an accelerator to regulate the density of unloading of material on truck, which allows to adapt the work to the conditions of the place.