In Spain, in 2021, more than 75.000 automatic biomass combustion equipment (pellet, splinter, bone,...), and nearly 70.000 firewood equipment have been installed. Many of them replacing fossil, diesel and gas energy systems, which negatively affect climate change. Is being implanted massively in independent homes, and increasingly in Neighborhood communities, industries, warehouses, farms, greenhouses, hotels, residences, universities, schools, hospitals and swimming pools.
The success of a good operation is in a correct installation of the equipment and its components. The support that the almost 10.000 professional installers who work in Spain find in the brands that participate in Expobiomasa with training, advice, ergonomics and efficiency is essential to achieve efficiency and profitability.
The Swedish company, Trelleborg Wheel Systems has announced that it will completely redesign the manufacturing process for its solid tires. The company will do so through the introduction of an advanced biomass boiler.
How a biomass installer is trained Although the increase in biomass trained installers compared to years ago is notable, Araceli Pimentel, from BRONPI, believes that "an important part still does not have the necessary knowledge." There is no official formal training for installers of biomass stoves and boilers, so in practice, it is acquired with day-to-day work experience.
The main objective of the work started at 2016 is to identify, design, model and develop a prototype of optimal filtration and particle retention, based on electrostatic technology (ESP), electrostatic precipitators for application in domestic boilers. At the beginning of March there was a meeting of the SIREP research project, led by Dinak, a company exhibiting expobiomasa 2019, in which the Energy Technologies Group of the University of Vigo also participates.
When it comes to heating your home if you are looking for savings and sustainability, a pellet or biomass stove is one of the most efficient heating systems. And as indicated by www.aquatubo.com when purchasing one of these systems you must take into account 3 essential characteristics: Location The place where you are going to place your stove is very important since the heat produced by a pellet stove will reach those areas that are in contact with the stove.
The metamorphosis of the Hotel des Poste de POST Luxembourg (Luxembourg Post) combines sustainable technology to minimize energy consumption through natural ventilation, solar, wind and biomass energy. The design of this architecture without carbon emissions is based on the circular economy and the concept "from cradle to cradle", a holistic method that is concerned with ensuring that everything that involves a product - from the conception of the idea to the decline - is sustainable and its life cycle does not end.
In recent years, pellet heating has been installed in the Balearic Islands due to its many advantages. Pellet heating is breaking billing records in 2018. According to the data registered in habitissimo, the 50% of the heating systems installed in the Balearic Islands are pellets.
Emissions to air are highly regulated, legislation and regulations regarding emissions from power production facilities are going to become more and more stringent in the near future. At the regulatory level, in the coming years, small and medium-sized biomass consuming facilities will be subject to emission limits for various atmospheric pollutants depending on their power.
The Spanish Association for the Energetic Valorisation of Biomass (Avebiom) will promote the implementation of digital emission control systems in small and medium power biomass combustion facilities in urban environments thanks to the Digital Biomass project, whose main objective is to "carry out a analysis of the possibilities, difficulties and challenges of implementing innovative systems for monitoring particle emissions using a panel of chemical and environmental sensors in biomass combustion facilities
The conception of new products requires a change not only in the aesthetic but in the concept of the pellet stove. Our analysis concludes that every pellet stove has two fundamental phases to achieve maximum efficiency. The efficiency or efficiency in combustion or burning technology and a second stage where the generated heat is transferred to the home; what we would call transmission efficiency or use of the generated heat.
The DIFLUX WOOD product range is defined as a Triple Wall Concentric Chimney with the smoke evacuation duct specifically designed for firewood stoves. This model of concentric chimney represents an excellent technical solution for this type of installations, since with the same chimney the evacuation of the combustion fumes through the insulated interior duct is carried out simultaneously, and the air intake for the stove through the concentric duct .
By means of the construction of modular pieces of 75x75cm and 32cm height, we facilitate the design and construction of unlikely shapes, carrying out and solving storage almost on demand. The modules are installed on the floor and connected to each other by a steel pipe through which the pellet is transported by the boiler's suction system; An automatic switching unit external to the silo allows to switch between the modules through which the boiler must suck.
The Professional Pellet Analyzer (PPA) is a fully automatic device for determining the moisture content, apparent density, mechanical durability and temperature of wood pellets. 100% works automatically by sampling and testing the pellets. The analysis frequency is up to one sample every 30 minutes and is ensured due to high calibration accuracy and excellent reproducibility. The instrument passes a "round-robin" test and can be delivered with an annual external calibration control.